Architects and Engineers Liability Contractors Liability Bad Faith Litigation Municipal Liability Municipal Law Insurance Coverage Insurance Litigation Personal Injury Premises Liability Workers Compensation
ISLN:
905394129
Admitted:
1989
University:
Pennsylvania State University, B.A., 1986
Law School:
University of Pittsburgh, J.D., 1989
Us Patents
Battery Charge Indicator Such As For An Implantable Medical Device
This document discusses, among other things, a system providing a battery charge indicator for an implantable medical device, such as using a lithium/carbon monofluoride (CFx) or other battery. Capacity vs. voltage data from a separate characterizing battery into a characterizing load impedance is stored in memory, such as in a lookup table or as a regression equation fitted to the data. For the actual battery of interest, then, a battery terminal voltage and a corresponding load current are measured, and a load impedance is calculated. A translation is performed to make the measured battery voltage and the characterizing capacity vs. voltage data comparable, so that a capacity reading can be obtained.
Composite Carbon Sheet, And Electrochemical Cells Made Therewith
Gregory Scott Moy - Madison WI Michael Andrew Ward - Belvidere IL Robert Brian Dopp - Marietta GA Robert Brian Loch - Woodbury MN John Edward Oltman - Mount Horeb WI Joseph Lynn Passaniti - Middleton WI
Assignee:
Rayovac Corporation - Madison WI
International Classification:
H01M 402 H01M 490 H01M 202
US Classification:
429 27
Abstract:
Cathode assembly precursor cathode assembly (26) and elongate air depolarized electrochemical cells (10) made therewith. Cathode assembly precursor comprises a closed-loop elongate cathode current collector (32), and perforations (56) from outer to inner surfaces, and catalystically active carbon extending into the perforations (56). The current collector (32) can be cylindrical and can be free from longitudinal jointing, or can have a longitudinal joint (54), preferably free from overlap of the side wall. The current collector (32) can comprise an imperforate edge region at the top (42) and/or bottom (44), left (48) and/or right (46) edge. The perforations (56) define an open traction of the wall, of about 45 to about 70 percent. Typical cathode assemblies (26) have air diffusion member (36) on the outer surface of the cathode assembly (26). Such air diffusion member (36) typically has thickness of about 0. 0025 to 0.
Robert B. Loch - Woodbury MN James M. Larson - St. Paul MN Brian D. Fredericksen - Delano MN
Assignee:
3M Innovative Properties Company - St. Paul MN
International Classification:
B29C 5900 B29D 6500
US Classification:
264 451
Abstract:
Approaches are described for producing porous, polymer electrodes with good characteristics for incorporation into polymer batteries. Two preferred processes are presented. The polymer electrodes can be subjected to additional processing to increase their porosity and electrical conductivity. The polymer electrodes preferably are incorporated into a polymer battery where the components are laminated together.
Robert B. Loch - Woodbury MN James M. Larson - St. Paul MN Brian D. Fredericksen - Delano MN
Assignee:
3M Innovative Properties Company - St. Paul MN
International Classification:
H01M 462
US Classification:
429217
Abstract:
Approaches are described for producing porous, polymer electrodes with good characteristics for incorporation into polymer batteries. Two preferred processes are presented. The polymer electrodes can be subjected to additional processing to increase their porosity and electrical conductivity. The polymer electrodes preferably are incorporated into a polymer battery where the components are laminated together.
Bis (Perfluoralkanesulfonyl)Imide Surfactant Salts In Electrochemical Systems
William M. Lamanna - Stillwater MN Robert B. Loch - Woodbury MN Alan D. Fanta - Minneapolis MN Steven D. Boyd - Woodbury MN Hiroshi Shimada - Tokyo, JP Phat T. Pham - Little Canada MN Bryan J. Johnson - Prescott WI
Assignee:
3M Innovative Properties Company - St. Paul MN
International Classification:
H01M 618
US Classification:
429307
Abstract:
Electrolyte compositions and electrochemical systems containing such compositions are described where the electrolyte includes in a matrix material a combination of a conductive salt and a bis(perfluoroalkanesulfonyl)imide surfactant salt. The compositions improve wettability of electrodes and separators while maintaining and improving conductivity, stability, and compatibility with other cell components.
Name / Title
Company / Classification
Phones & Addresses
Robert Loch President
Lach & Assoc Inc Computer Related Services Custom Computer Programing · Software Consulting and Programming
421 Bear Ave S, Saint Paul, MN 55127 6127474115
Robert Loch Principal
Loch Robert John Business Services at Non-Commercial Site
Robert Loch (1974-1981), Stephanie Lawter (1976-1980), Steve Shaw (1959-1960), David Walker (1953-1959), Mike Jenkins (1975-1976), Aimee Buller (1983-1985)